XL node
One big node for your own ideas, with dimmable outputs and relays built in.
What it does
The XL node is a general-purpose node for jobs the others don't cover. It has ten GPIO terminals, I2C and SPI for sensors and displays, four high-power PWM outputs and two relays, all on one board.
Six of the GPIO can read analogue voltages or touch. The other four, and the I2C and SPI terminals, switch between 3.3V and 5V with a slide switch, so most sensors wire straight in.
Each PWM output dims a light or sets the speed of a fan or motor, at up to 5A, and has its own fuse. The outputs feed the loads from the node's supply, so it needs its own power feed, fused at 20A or less.
Each relay is a plain switch between its two terminals, rated 10A, for mains or 12V and 24V loads. The node feeds nothing to them, so bring a fused supply to one terminal and wire the load to the other.
Mains wiring can kill. Have it done or checked by someone qualified. The printed case is not a certified enclosure, so print it in a flame-retardant material if it will hold mains.

