All nodes
CC-MINI · DraftConcept only

Mini node

A small node for a few sensors or switches, where a full node won't fit.

A render of the mini node in its printed case, with the four numbered terminals and the power and CAN terminal labelled on the lidA render of the mini node's circuit board, with four three-way screw terminals along one edge and a four-way terminal beside them

What it does

The mini node is the smallest node. It has four GPIO terminals for a few sensors or switches, in a case small enough to tuck behind a panel.

Each terminal has its own 3.3V and ground beside the input, so a sensor or a switch wires straight in. All four can read analogue voltages.

Power and the CAN bus share one four-way terminal, so the cable in is the only other wiring. The inputs are 3.3V only and the node has no 5V output. Its 3.3V supply gives 0.6A, shared between the node itself and the four terminals, so use a bigger node for 5V sensors or anything that draws real current.

Specifications

GPIO4
GPIO voltage3.3V
Supply12V/24V
Size36mm x 48mm
Concept onlySpecs subject to change

Would you fit this in your van?

CamperCan is in the prototype stage. Tell us what you'd use it for and what you'd like to see, and we'll keep you posted.

Register interest